Destiny Tool test tool report
On this page your can document your Guaranteed Trial Order (GTO) Performance.  Remember, by completing this form you can get your trial tools for FREE!

Determine the spindle speed (RPM) and feed rate (IPM) for a milling operation, as well as the cut time for a given cut length. Milling operations remove material by feeding a workpiece into a rotating cutting tool with sharp teeth, such as an end mill or face mill. Calculations use the desired tool diameter, number of teeth, cutting speed, and cutting feed, which should be chosen based on the specific cutting conditions, including the workpiece material and tool material

    Test Tool Report

    Reseller Information

    Customer Information

    Material
    Max file size: 20MB
    Application Details
    Max file size: 20MB

    CNC Machine Tool, Tooling & Fixtures
    Max file size: 20MB
    NOTE: End Mill holders are NOT recommended for use with our tools.
    Max file size: 20MB

    Description of Current Tooling
    Max file size: 20MB

    Destiny Tool End Mill Information

    Max file size: 20MB
    Definitions
    SFM = Surface Feet per Minute
    RPM = Revolutions Per Minute
    IPM = Inches Per Minute
    IPT = Inches Per Tooth (a.k.a. CLPT)
    MRR = Metal Removal Rate (a.k.a. CIM)
    ADC = Axial Depth of Cut (a.k.a. ADOC/DOC) 
    RDC = Radial Width of Cut (a.k.a. RDOC/WOC) 
    Formulas
    SFM = RPM X .262 X Tool Diameter 
    RPM = SFM X 3.82 ÷ Tool Diameter
    IPM = RPM X IPT (CLPT) X Number of Flutes 
    IPT = IPM ÷ (RPM X Number of Flutes)
    MRR = RDC X ADC X IPM (a.k.a. CIM) 
    HP = KW X 1.342
    Torque (Full Load) = 5252 X HP ÷ RPM 

    Test Cut #1

    Max file size: 20MB

    Test Cut #2

    Max file size: 20MB

    Authorized Reseller Contact Information

      THE BELOW INFORMATION IS WHERE YOU CAN ADD INFO ABOUT YOUR SUPPLIER OF DESTINY TOOL PRODUCTS OR YOUR INFORMATION ABOUT YOUR PREFERRED SUPPLIER. PLEASE NOTE: WE ONLY SELL OUR PRODUCT THROUGH APPROVED RESELLERS
    Get FREE TOOLS from us!
    There are THREE ways:

    One*
    1. Submit your report of SUCCESSFUL tests to us!
    2. Provide Destiny Tool with video and/or 5-10 pictures which can be used for our Blog and Social Media marketing. We will provide full attribution to you company as well! 
    3. The test tools will be credited NO CHARGE to the GTO and shipping charges will also be credited.

    Two*
    Upload a video with the successful test information (speeds, feeds, material,etc) to your YouTube or Vimeo account. If the video is of usable quality (no swearing :-) and send it us the raw video for our YouTube channel.

    Three*
    Do both and you will get a FREE duplicate delivery of your GTO! No Charge.**

    *We may contact you for clarification in preparation of the posting.
    **Up to $500 list price value. Subject to terms and conditions of Media Release Form.
If you hit the submit button and nothing happens please check the red highlighted required fields above to insure that the form is complete