We met 16 year old Jeremy Harshman at the PRI show in 2016 and his father bought him a Fadal CNC machine during the show. He's a young man with lots of talent. We look forward to see much more from him in the future.
Here's a quick video of a roughing operation he recently did with one of our end mills. He's running at 4000 RPM, 100 IPM with a .05" radial depth and .75" axial deep cut W
This is just his second time using a Destiny Tool, I'm very happy with it's performance. According to Jeremy, "With a little fine tuning, we should be able to ramp up the feed rate much more!"
This was done on a T&S machines TS 100.
Here's a quick video of a roughing operation he recently did with one of our end mills. He's running at 4000 RPM, 100 IPM with a .05" radial depth and .75" axial deep cut W
This is just his second time using a Destiny Tool, I'm very happy with it's performance. According to Jeremy, "With a little fine tuning, we should be able to ramp up the feed rate much more!"
This was done on a T&S machines TS 100.
Below is another video of Jeramy when he was just 14 years old! It great to see younger people coming into our industry!
RSS Feed
